|
Post by valerie on Jun 13, 2011 12:39:11 GMT -5
I met Grandmaster David and Ray at the Coptic Conference in April this year. Wonderful experience. I have recently been using the (free) Ultra Lite on myself. Am I able to use it as well for others if I fill in their names? Thank you! Valerie
|
|
|
Post by Kathy Blair on Jun 13, 2011 16:17:24 GMT -5
Hello, and welcome! You may use any SRC4U software version (including the Ultra Lite)on anyone, at anytime. Ensure that their permission is granted prior to doing any kind of energetic work. Please feel free to review the Help Manual as posted on the SRC4U website at: www.src4you.com/?page_id=247Hope that this helps! Help to heal as many as you can... Kathy
|
|
|
Post by valerie on Jun 13, 2011 18:07:55 GMT -5
Kathy, thank you so very much. I really appreciate your response...and the link to the Help Manual. I've seen before that there was information, but I could never find where it was. I figured it must have just been for the paid versions.
This was very helpful.
Thanks again, Valerie
|
|
|
Post by Kathy Blair on Jun 13, 2011 18:40:50 GMT -5
Valerie, You are most entirely welcome!! The four founders created the Ultra Lite version for easy use, quick learning curve and, best of all... perpetually FREE. It was our first project. Stay tuned for others....and tell everyone that you know about SRC4U -- they will thank you for thinking of them!! Enjoy, and help to heal as many as you can... Kathy
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 21, 2011 4:14:47 GMT -5
Hi Kathy, I too am a brand new member and would like to know if the timer on the ultra Lite is accurate. The reason being is when I first tried it out this moring it read 24min and 58 secs and then when I contnued on for a half an hour session the next time I clicked start it was only for 1 minute and 20 sec. It would be nice if it were in 30 min incriments. So does te timer work properly?
|
|
|
Post by David Harris on Jul 21, 2011 22:54:28 GMT -5
Hi Kathy, I too am a brand new member and would like to know if the timer on the ultra Lite is accurate. The reason being is when I first tried it out this moring it read 24min and 58 secs and then when I contnued on for a half an hour session the next time I clicked start it was only for 1 minute and 20 sec. It would be nice if it were in 30 min incriments. So does te timer work properly? Hello Ron, Yes, the timer works appropriately. The way the software sees things is in a layered format. In the Ultra-Lite version the software sees a single layer or a group of layers (if applicable) that are relevant to the request. Then it calculates how long it will take to balance the energy in those layers. Then it runs, finishes, and re-scans for optimum balance. If it does not find the balance optimal for body, it will request more time. It does not run for a standard 30 mins at a time because this could cause an imbalance as things may only need 1 min to balance before moving to the next layer or reconfiguring the current layer. I hope this helps. God Bless.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 22, 2011 6:38:14 GMT -5
Thank you Grand Master, so therefore if it says 24 minutes and runs that long then says it is completed then that's enough? I was a bit confused on this and one time went back and started over again. So now I understand it. Thank you, Ron
|
|
|
Post by David Harris on Jul 22, 2011 9:29:34 GMT -5
Thank you Grand Master, so therefore if it says 24 minutes and runs that long then says it is completed then that's enough? I was a bit confused on this and one time went back and started over again. So now I understand it. Thank you, Ron Yes and no. It means yes it is done with that series of layers. But no, it may not be completely done with the current request. Explanation: The SRC4U does not diagnose you. When you ask it for something it looks at that thing and says "Okay, what they are asking for to be balanced is made like this, A30+B45+C12=D87" "Therefore D87 is too high and needs to be lowered" It then sends the correct balancing signals to the requested issue(s) for a recommended period of time. After that time frame is complete it looks again to see if the equation is still the same or similar, A25+B30+C10=D65. Then it says "Okay, D65 is still too much I need more time." Then it will request more time. The software sees the difference from D87 to D65 not being far enough from the original starting point and although the number "has changed", it may not be enough for you to feel any noticeable change in the request. However, if it then (on it's second run) went from D65 to D30, it will see that as a major change in the original request, therefore it is no longer exactly the original request. At that point it will issue a clearing bell sound and a "cleanup" signal burst which may give you a boost of another 10 points and drop D30 down to D20. You at that point should look for the problem that you originally requested and see if it has either improved by a percentage or has been corrected beyond your ability to detect it. If it is 50% better than before, it most likely had more problems associated with it and just needs to be run again from a new understanding. That does not mean you need to change the wording you used to describe it originally. If you feel a need to change it then do so otherwise it will re-evaluate what you mean and adjust it's method of action accordingly. I hope this is clear enough to understand as I know how complex and confusing this can be to try to understand it. LOL
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 23, 2011 4:07:58 GMT -5
It's interesting because this moring I entered something and it went only for 7 minutes and 4 sec. so therefore GM I can then say it was completed unless it requests more time? also the other day I did hear a bell go off and didn't know what it meant. Is this the bell you are referring too?
Ron
|
|
|
Post by David Harris on Jul 23, 2011 10:14:37 GMT -5
It's interesting because this moring I entered something and it went only for 7 minutes and 4 sec. so therefore GM I can then say it was completed unless it requests more time? also the other day I did hear a bell go off and didn't know what it meant. Is this the bell you are referring too? Ron First, yes that is the bell sound I was referring to. Second, it is that it balanced the issue(s) enough that it is no longer exactly the same the same issue(s). Therefore, if you feel something from it is still there, run it again. Your description of the problem has been balanced; but, there may be other factors you/your body were not aware of. This is how it figures things out in a simplistic way. Example: Your pain is at 100% You run a session on "My pain" 20 minutes later Your pain is at 50% and the bell chimes. Your pain is not gone but it has lessened. Remember that what you requested was "My Pain", so the software looks for the pain and cleans it up. It figured out what was causing 50% of the problem just based on that description. But what was causing the other 50% of the pain is still unknown and needs to be reassessed. So it tells you to that it has finished with the request, and if YOU feel a need to continue, do so; and, if not, then don't. (continuing) Your pain is at 50% after one session completed You run a second session using the words "My Pain" again. 2 minutes later: The chime rings and the session is finished. Your pain is completely gone. You see, whatever the problem was in the second round was not as difficult to fix and did not require the same length of time or longer (hence real time correction); but, it was causing 50% of the pain all by itself. I hope this helps.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 24, 2011 3:25:36 GMT -5
Thank you Grand Master this does help. This system is totally amazing to me. And i thank you and everyone who has been involved in designing and creating this.
God Bless
|
|
|
Post by mhall77 on Jul 24, 2011 21:46:03 GMT -5
GMD - Thank you for your great explanations. They cleared up some questions I had. I am having great success with sessions. My son-in-law has been a sceptic for quite some time and it was amazing that he asked for my help with a painful shoulder that he has had for a very long time. He couldn't lift his arm up past his chest. I kept on running him on shoulder pain for about 3 days. One day he went to pull a book off a high shelf and suddenly realized he could reach it without pain. He was excited as it had given him a lot of pain for quite some time. Thank you all for making the SRC what it is.
Blessings, Marlene
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 25, 2011 7:25:30 GMT -5
GMD, Another question, how does this system know who the person is who is using it? For example lets say that the persons name is Mary Brown or that I put Mary Brown's name in for a session. There are many Mary Browns I am sure in the world so how does it know which Mary Brown I am referring to if i don't have to specify an address, country or state they live in? This is a mystery to me.
Ron
|
|
|
Post by 5sevens on Jul 25, 2011 8:46:44 GMT -5
When you type the name, say the name or even think of a particular person an energetic signal is created. And, just like the signal created when you dial a number on your phone, that signal is directed to the person intended and interacts with their energetic field. While this may be somewhat of a simplistic explanation, it has helped me accept that I don't have to fully understand the mechanics involved in order to reap the benefits. I cannot detail all the intricacies of the steps taken when I call someone's moving cell phone from my moving cell phone. I'm just happy when the connection occurs and I can converse with the other person. In a similar fashion, I don't have the understanding or skill set, developed through intense study and practical application, that Grand Master David is able to tap into when he assists someone in need. I can, however, help a friend's body expel headache symptoms by utilizing a Qi Gong mudra GMD taught me. I am just very happy that the technique works regardless of my inability to fully grasp the inticacies of the process. And now, you and I and all the others who use the SRC4U software can tap into levels of Qi Gong mastery garnered from decades of applied research and training. The SRC4U enhances the God-given abilities each and every one of us possess. If I, and my overly active, analytical mind, can utilize this software successfully despite a lack of complete comprehension; there is hope for everybody. Embrace the software, research the wonders of Qi Gong, and thank God that He gave us this wonderful tool to use. Help yourselves and help others. And, I hope this explanation helped.
Stay Blessed!
Ray
|
|
|
Post by David Harris on Jul 25, 2011 9:07:11 GMT -5
GMD, Another question, how does this system know who the person is who is using it? For example lets say that the persons name is Mary Brown or that I put Mary Brown's name in for a session. There are many Mary Browns I am sure in the world so how does it know which Mary Brown I am referring to if i don't have to specify an address, country or state they live in? This is a mystery to me. Ron Okay, first, there is a lot you have to understand. Otherwise what I am going to tell you will sound really "out there". Second, is my little disclaimer. Everything I am about to tell you is based on The Martial Arts/Sciences of which only a handful of people around the world are educated in; as the information has been kept secret from all but only the highest ranking Martial Artists. Although they know the principles and techniques the software is based on in the human body, even they marvel at how a software program can do what it does. They will tell you "Yes of course I understand how it works, but I don't understand how a computer can do that; as, to our understanding, only living things can produce such effects." It took me 1 year of intense study to figure out and thoroughly understand all the elements in the equation. Then 5 more years to develop, test, and refine the many, many, many processes that make the SRC4U able to do such amazing things. And, we are still developing and pioneering new technology; as we want to be able to deliver the best quality product possible. Since there is no competition for our product at this time, we must compete with ourselves. So whatever we release becomes the standard of what to beat. All that being said: The software reads energy signatures. That is one of its primary functions. When you think of "anything", your body creates a specific energy signature. The software takes the sample of your signal (the person or whatever you are thinking of) and uses it like a base carrier wave to emit the rest of the signals. You see, by the time you "think" about something enough that it becomes a thought, your body has done millions of calculations. Now that it has become a full thought, the signal has already been tuned and calculated (by your body) to the precise signal for that person. The software then samples it (because as you type, you have to think about whatever it is ) and, uses it to send the information. The software knows who to work on because you know who to work on. The technology is so refined on the SRC4U that you can hear a story from a friend about a guy (that your friend knows them personally and you don't) and that guy knows somebody else (that you don't know) that talked to another person (that you don't know) that heard of a person that has a problem but they are not sure what the problem is. (No one in this story really knows who the final person is or what the problem is); and, you can run a session on the SRC4U by typing in "That person" to the name box; and, in the theme box type "All That Stuff" and it will find that specific person and send energy/signals to them for the problem no one in the story is sure about. Take care.
|
|