|
Post by EverythingSRC on May 20, 2015 20:28:49 GMT -5
Greetings! Ralf and I have been doing a lot of on-line trainings with individuals using TeamViewer. Typically, Ralf teaches you how you can raise your Qi energy. This increases your energy & your health. At the same time it allows you to have better SRC sessions! We do not charge for the time this takes. After this we start the actual training. We added a new optional feature to the training sessions, which our clients seem to love ~ I record the training session for an additional $20 so that you have your own copy that you can refer back to over and over, as often as you wish. We found that before we started this, clients would call or email back with: "... what did you say about the...?" or, "Can you tell me again how to do...?" Now with a video of your own you don't have to take notes and then try to decipher them! Just click on a link and go over the exact training. One of the things we have started is to do short videos on specific aspects of the software. Because the last update included the new Optimize Connection button in the Name box area we decided to start with a video on this. Please click the link below and enjoy! Save the video to your hard drive for future viewing. Optimize Connection videoMany Blessings and Warm Regards, Susan
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 22, 2015 11:15:28 GMT -5
Unable to watch. I get message of "unable to connect to server".
|
|
|
Post by EverythingSRC on May 23, 2015 11:40:25 GMT -5
Please try again. It could be your computer is set to work from a proxy. If so, you need to download the video from a different computer.
Ralf
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 23, 2015 13:31:00 GMT -5
Nothing wrong with my computer. I can watch any other videos with no issues. No other computer to use. It's a blocking issue from your end.
Thnx
|
|
|
Post by EverythingSRC on May 24, 2015 12:11:59 GMT -5
Nothing wrong with my computer. I can watch any other videos with no issues. No other computer to use. It's a blocking issue from your end. Thnx Everyone else can open this link. Depending on your browser, when you click on the link, it will not open the video. Depending on your browser, when you click on the link, you should get a window allowing you to download the video to your computer - see attached image file. If this does not work you can give us a call, or an email and we will walk you through it with TeamViewer. Susan or Ralf, 928-770-4383 (Pacific time zone), everythingsrc@yahoo.com
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 25, 2015 15:16:15 GMT -5
Thanks, but I've finally got a new computer and rid of the hackers who got all my banking info and fried my other laptop. I prefer to keep this one secure and free from hackers. Not willing to make any changes.
Thank you though.
|
|
|
Post by Joanne on May 26, 2015 2:21:58 GMT -5
Easy to download and watch this video. Thank-you for the info., greatly appreciate it!
|
|
|
Post by EverythingSRC on May 26, 2015 13:40:20 GMT -5
You're Welcome! Stay tuned for more to come, Susan & Ralf
|
|
|
Post by rocky69 on May 29, 2015 4:46:42 GMT -5
First of all thank you very much for this training on the Optimizer button Susan and it is working fine for me. Bev I don't understand why it is not working for you. It works great for me.
Sorry to hear about the Hacker rip off. However that link should work for you too. It is well worth watching to get a good understanding of how the Optimizer works. Susan I really appreciated this explanation too. Thank you.
And Wow on one of my clients I worked on the guage for receiving energy went all the way to the end. This made me really happy like wining a jackpot. next day I talked to him in person and he was so happy with the results of the session too. I do love the Optimizer and thank you both Susan and Ralph for a great job of setting it up.
Ron
|
|
|
Post by Diamond on May 29, 2015 18:23:04 GMT -5
I have no "Optimizer button" so the video does not apply to me. After much effort I was finally able to open only to be disappointed that it didn't apply to me. Only for those with money.
|
|
|
Post by GreenLightSaysGo on May 29, 2015 23:58:31 GMT -5
Please run the SRC4U Updater for the PREMIUM software. If you have any difficulty whatsoever then please do submit a Technical Support Ticket www.src4all.com/techsupport.aspx
You may contact me directly in the following ways: email stpatrice705@yahoo.com or send text to my cellphone 972-805-7991 or call that same number to leave me a voicemail message or SKYPE greenlightsaysgo. By the way, ALL our Updates are 100% FREE so there is no preferential treatment for different customers as we treat everyone with the same high regard and deep respect no matter if they are using the free SRC4U ULTRA LITE, or any DEMO/DONGLE/ONLINE Subscriptions of SRC4U BASIC, MACH1, eBody, ShEmotion, PowerPack, PREMIUM, Scheduler or advanced Professional (PRO TOOLS)!
We aim to satisfy all Technical Support requests rapidly and to the very best of our ability.
We do NOT want any customer to suffer in silence or frustration but you must be responsible and reach out to let us know you need some assistance!
Best hopes and thanks as always, Kevin SRC4U Technical Support
|
|
|
Post by EverythingSRC on May 30, 2015 9:21:28 GMT -5
Thank you so much, Kevin. We both really appreciate you so much!! Blessings! Susan
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 30, 2015 12:57:20 GMT -5
What is the link to update?
|
|
|
Post by Diamond on May 30, 2015 13:37:35 GMT -5
Got the update and the Optimizer option. Thanks for the great training video. I think this will help a lot with my issues and energy. Thanks Ralf for developing and adding. Thanks Susan for the teaching.
Bev
|
|
|
Post by GreenLightSaysGo on May 30, 2015 21:23:14 GMT -5
What is the link to update? The Updater is located at the end of this page
www.src4you.com/downloadlinks/
Download then Install it.
"After installation you will have an Icon for the SRC4U-Updater on your desktop. Run it, select your installed SRC4U-Version; Click "Check for updates" You will be prompted for continuation if new files are found."
Detailed instructions are attached if needed or contact me for assistance.
Best hopes, Kevin SRC4U Technical SupportUpdaterword.doc (77 KB)
|
|